Solar Technical Support
SolarEdge FAQs
If you’ve recently had a solar installation from us, then we will process the paperwork required upon receipt of the completion payment. You will receive an email from SolarEdge asking you to register your account.
Please follow this link or watch the YouTube video linked below. https://www.solaredge.com/us/service/support/system-owner/configuring-inverter-communication https://www.youtube.com/watch?v=wMaJxhl0vl8
If these steps don’t work or do not match your inverter please submit a ticket including your email address requesting the full inverter communication steps.
In order to view your usage and your imported & exported power you will require a modbus meter. This monitors the required data and will provide your generation, consumption, imported & exported power figures all on your existing SolarEdge dashboard.
If you have had a modbus meter installed and cannot see this data, please submit a ticket for your issue.
If you have not had a modbus meter installed and would like one, please contact your sales advisor or email us at technicalhelp@goodenergy.co.uk requesting a quotation for installation of a modbus meter.
Please note generation will vary greatly over the year and your peak generation will be equal to your inverter size. For more information on the design process and oversizing of inverters please see the following video. https://youtu.be/TGU-rfTqd3s
The biggest benefits may require some slight lifestyle changes. Use your MySolarEdge app to see when your peak generation is and try to shift your power usage into this time slot. Appliances like washers, dryers and other high energy users can often be set on timers to run in the middle of the day. Joining a high paying export tariff will also help you to benefit from any unused solar power.
myenergi
This usually originates from the immersion heater. Turn off the Eddi and immersion heater and remove the plastic cover from the immersion heater if there is one. You should be able to see the temperature dial, check this is set to the correct temperature. There should also be a button or a pinhole labelled as “Reset”, “RS”, “Safety” or similar. Use a small object to push the button and reset the immersion element. Replace the cover and turn your devices on, the Eddi should now work as normal. If you have to do this frequently there may be a fault with your immersion heater.
If this doesn’t resolve your issue, please submit a support ticket.
In order to view your solar generation or battery you will require additional CT’s. You may also require an additional Harvi depending on the relative locations of your devices. If you already have these CT’s and they have stopped working, please submit a support ticket. If you do not have the required CT’s please contact your Sales Advisor or email us at technicalhelp@goodenergy.co.uk requesting a quotation for the additional works.
If you aren’t receiving any data from the myenergi app you may need to reconnect your myenergi device to the internet. If you have a V1 eddi or zappi and are using a Hub, then please check the connection on the hub and ensure it is paired to your devices. If you have a V2 eddi or zappi, then please check this is connected. Refer to the myenergi website for more details.
If your app is showing yellow triangles against certain devices, then there have recently been issues with the connection to that device. Please check the devices are paired.
Tesla Powerwall
For questions and issues relating to your Powerwall you will find a host of information provided directly by tesla. For support videos, please visit Tesla’s support page. Or take a look at the follow for more on the Powerwall https://www.tesla.com/support/energy/powerwall/learn/why-powerwall
If you think you have a fault with your Powerwall please create a support ticket.
Other
You will need to apply for an export tariff.
Good Energy’s export tariff, Solar Savings, pays highly competitive export rates for your unused electricity. If you installed solar and battery with us, you will also be eligible to our exclusive rate for 12 months. Other export tariffs are also available from other suppliers.
Once you’ve picked a tariff, the supplier will ask you to fill in some forms, you may require your MCS Certificate and DNO Response letter which should be given to you by your installer. Empower Energy Ltd customers will find this in their client portal.